Brass Silencer, Easy Installation, Quick & Reliable Connection

Brass silencers are typically installed on exhaust or vent ports.

Brass Silencer, also known as brass muffler, is made of sintered brass powders and a brass housing. Typically, it is widely used to reduce dynamic noise of the pneumatic components or device exhaust to an industry accepted level with minimum flow restriction and prevent metal chips, abrasive grits, dust and other contaminants from entering open exhaust ports. Brass silencer can also be used for air cylinders, solenoid valves, pneumatic valves, air tools, etc.

• Excellent noise suppression effect
• High durability and wide applications
• Compact design for confined space
• Most models are available in inch and metric sizes
• NPT, G and BSPT threads are available
• Easy installation, quick and reliable connections
• Special discounts for large orders and a variety of promotion campaigns

Features

• Operating pressure: 0–10 bar;
• Operating temperature: -20 °C to +60 °C
• Medium: compressed air, filtered, lubricated or non-lubricated, vacuum, inert gases
• Noise elimination effect: 20–25 db
• Filtration rating: 5-100 μm

Category

Brass silencer can be divided into powder sintered filter type, compressed knitted mesh type and exhaust muffler throttle valve type. Their specific parameters are as shown below.

• Powder Sintered Filter Type

  

  BS-01: Type A powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G M5"	17	8
  G 1/8"	24	13
  G 1/4"	33	17
  G 3/8"	44	22
  G 1/2"	49	24
  G 3/4"	57	30
  G 1"	72	36
  G 1 1/4"	77	46
  G 1 1/2"	83	52
  G 2"	105	64

  

  BS-02: Type B powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G M5"	7.5	8
  G 1/8"	9.5	13
  G 1/4"	11	16
  G 3/8"	12.5	19
  G 1/2"	13.5	24
  G 3/4"	17	30
  G 1"	20.5	36

  

  BS-03: Type C powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G M5"	19	8
  G 1/8"	23	12
  G 1/4"	27	15
  G 3/8"	36	18
  G 1/2"	40	21
  G 3/4"	48	27
  G 1"	62	34
  G 1 1/4"	83	46
  G 1 1/2"	92	53
  G 2"	108	64

  

  BS-04: Type D powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G M5"	9	8
  G 1/8"	11	12
  G 1/4"	12.5	15
  G 3/8"	15	18
  G 1/2"	16	21
  G 3/4"	18	27
  G 1"	20	34

  

  BS-05: Type E powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	D (mm)
  G 1/8"	5	6
  G 1/4"	6	8
  G 3/8"	7	10
  G 1/2"	8	15
  G 3/4"	9	20
  G 1"	10	26

  

  BS-06: Type F powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G M5"	17	7
  G 1/8"	20.5	12
  G 1/4"	26.5	15
  G 3/8"	33.9	19
  G 1/2"	40.5	23
  G 3/4"	51.5	30
  G 1"	66	36

  

  BS-07: Type G powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	D (mm)
  G 1/8"	21	12
  G 1/4"	25	15
  G 3/8"	36	19
  G 1/2"	43	23
  G 3/4"	53	29
  G 1"	63	36

  

  BS-08: Type H powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	CH (mm)	D (mm)
  G 1/8"	21	7	11.5
  G 1/4"	25	8	15
  G 3/8"	36	10	19
  G 1/2"	43	14	23
  G 3/4"	53	17	29
  G 1"	62.5	22.5	36

  

  BS-09: Type I powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	CH (mm)	D (mm)
  G 1/8"	17.5	11.5	8
  G 1/4"	24	15	10
  G 3/8"	31	19	13
  G 1/2"	37	23	14
  G 3/4"	50	30	19
  G 1"	62	37	24

  

  BS-10: Type J powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	D (mm)
  G 1/8"	12	23
  G 1/4"	14	27
  G 3/8"	19	37
  G 1/2"	23	45
  G 3/4"	28	53
  G 1"	35	57

  

  BS-11: Type K powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	CH (mm)	D (mm)
  G 1/8"	60	5	7
  G 1/4"	64	5	8

  

  BS-12: Type L powder sintered brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	29	13
  G 1/4"	34	17
  G 3/8"	37	22
  G 1/2"	44	27
  G 3/4"	53	32
  G 1"	65	41

• Compressed Knitted Mesh Type

  

  BS-13: Type A compressed knitted mesh brass silencer.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	15	13
  G 1/4"	20	16
  G 3/8"	20	19
  G 1/2"	22	24
  G 3/4"	24	30
  G 1"	27	36

• Exhaust Muffler Throttle Valve Type

  

  BS-14: Type A exhaust muffler throttle valve.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	23	12
  G 1/4"	27	14
  G 3/8"	33	17
  G 1/2"	33	21
  G 3/4"	33	27
  G 1"	35	34

  

  BS-15: Type B exhaust muffler throttle valve.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	33	12
  G 1/4"	35	14
  G 3/8"	43	17
  G 1/2"	50	21
  G 3/4"	60	27
  G 1"	78	34

  

  BS-16: Type C exhaust muffler throttle valve.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	35	12
  G 1/4"	38	15
  G 3/8"	38	17
  G 1/2"	42	21
  G 3/4"	47	27
  G 1"	58	34

  

  BS-17: Type D exhaust muffler throttle valve.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	35	12
  G 1/4"	36	15
  G 3/8"	44	17
  G 1/2"	50	21
  G 3/4"	60	27
  G 1"	75	34

  

  BS-18: Type E exhaust muffler throttle valve.

  Screw Thread	Dimension
  Size	L (mm)	S (mm)
  G 1/8"	38	13
  G 1/4"	38	16
  G 3/8"	52	22
  G 1/2"	53	22
  G 3/4"	70	30
  G 1"	70	36

Application

Brass silencer is used for valves, cylinders, pneumatic tools and systems like air transport screwdriver or air drill to reduce the noise of air release.

Brass silencer is used for pneumatic triple solenoid valve.

Brass silencer is used for pneumatic switch manual valve.

Please provide the detail requirements when inquiry to us. It will helps to give a satisfactory answer.