The honeycomb grease filter made of aluminum, stainless steel and steel consists of frame, mesh grid and handle. It is designed to split the incoming grease laden air into many criss-cross streams. The resulting changes in direction forces grease particles to contact and adhere to the surface of the media. The excess oil can then drain through the corner drainage holes into the collection channels. Its frame is screwed together which allows for easy removal and replacement of the filter core if required. Due to its smooth walled passage of the core, it is efficient and easy to clean.
Specification:
PART NO. | DIMENSIONS | NOMINAL AIR FLOW |
---|---|---|
H × W × D (mm) | (L/Sec) | |
HGF-1 | 254 × 394 × 50 | 250 |
HGF-2 | 254 × 495 × 50 | 300 |
HGF-3 | 295 × 495 × 50 | 360 |
HGF-4 | 394 × 394 × 50 | 390 |
HGF-5 | 394 × 495 × 50 | 460 |
HGF-6 | 394 × 622 × 50 | 600 |
HGF-7 | 495 × 295 × 50 | 300 |
HGF-8 | 495 × 394 × 50 | 460 |
HGF-9 | 495 × 495 × 50 | 600 |
HGF-10 | 495 × 622 × 50 | 770 |
HGF-11 | 597 × 597 × 50 | 900 |
HGF-12 | 622 × 394 × 50 | 600 |
HGF-13 | 622 × 495 × 50 | 770 |
HGF-14 | 622 × 622 × 50 | 950 |
Notes: special sizes can be made on request.
Feature:
Installation: In order to prevent the grease attached in the filter dropping when used, the honeycomb grease filter must be always installed with its face at not more than 30 degree from the vertical.
Maintenance: Honeycomb grease filter should be cleaned regularly to prevent the grease from collecting in the filter. Besides, when clean it, the cleaners containing caustic solution must not be used, because they will corrode the filter.
Application: The honeycomb grease filter is widely used to indoor smoke filtration, air containing and ventilation system, cabinet pre-filtration ventilation system and large hood fume filter.
Please provide the detail requirements when inquiry to us. It will helps to give a satisfactory answer.