Home >產品 >圓柱形濾芯

圓柱形濾芯穩定,高精度過濾等級

圓柱形濾芯也 燒結圓柱形過濾器由五層燒結金屬絲布製成,包括保護層,控制層分散層和兩個增強網。 多層燒結絲網在真空燒結爐中燒結之前重疊在一起。 然後將燒結的絲網捲成圓柱形,兩端的組件焊接在一起。 他們可以生產成不同的形狀,如圓形,筒,錐,褶。 它的過濾比範圍從0.5微米到200微米。

Five different shapes and sizes stainless steel cylinder filter elements
規格
結構圖
The drawing of sintered wire mesh shows the details of protective, control, dispersion, reinforcing layer

燒結絲網結構圖:

圓柱形過濾器網孔尺寸表:
型號 標稱額定值 (μ) 保護層 (網) 控制層 (網格) 分散層 (目) 加強層 (網) 加強層 (網) 厚度 (mm) 平均透氣度 (L/min/cm2) 泡點壓力 (mmh2O) 重量 (kg/m2) 孔隙度
CYFE-1 1 200 400 × 3000 200 12 × 64 64 × 12 1.7 1.81 360 - 600 5層8.4;
6層14.4
關於40%
CYFE-2 2 100 325 × 2300 100 12 × 64 64 × 12 1.7 2.35 300 - 590
CYFE-5 5 100 200 × 1400 100 12 × 64 64 × 12 1.7 2.42 260 - 550
CYFE-10 10 100 165 × 1400 100 12 × 64 64 × 12 1.7 3.00 220 - 500
CYFE-15 15 100 165 × 1200 100 12 × 64 64 × 12 1.7 3.41 200 - 480
CYFE-20 20 100 165 × 800 100 12 × 64 64 × 12 1.7 4.50 170 - 450
CYFE-25 25 100 165 × 600 100 12 × 64 64 × 12 1.7 6.12 150 - 410
CYFE-30 30 100 400 100 12 × 64 64 × 12 1.7 6.86 120 - 390
CYFE-40 40 100 325 100 12 × 64 64 × 12 1.7 7.10 100 - 350
CYFE-50 50 100 250 100 12 × 64 64 × 12 1.7 8.41 90 - 300
CYFE-75 75 100 200 100 12 × 64 64 × 12 1.7 8.70 80 - 250
CYFE-100 100 100 150 100 12 × 64 64 × 12 1.7 9.10 70 - 190
CYFE-150 150 50 + 100 + 50 + 30 + 100 + 50 2.0 25.00 50 - 150
CYFE-200 200 40 + 80 + 40 + 20 + 40 + 80 + 40 2.0 26.00
筒式濾芯1
Cylinder filter element one drawing including its length, diameter, installing forming

筒式濾芯1

型號 L (mm) D (mm) M 過濾面積 R (μm) 過濾介質
CFL-1-14/65-R 65 14 M10 × 1P; M14 × 1.5P; 1/4 「NPT 0.002米2 2、5、10、15、20、30、40、75 不銹鋼燒結纖維氈,不銹鋼絲布
CFL-1-14/250-R 250 0.01米2
CFL-1-14/500-R 500 0.022米2
CFL-1-14/1000-R 1000 0.044米2
筒式濾芯2
Cylinder filter element two drawing including its length, diameter, installing forming

筒式濾芯2

型號 L (mm) D (mm) M 過濾面積 R (μm) 過濾介質
CFL-2-25/250-R 250 25 M20 × 1.5P 0.019米2 2、5、10、15、20、30、40、75 不銹鋼燒結纖維氈,不銹鋼絲布
CFL-2-25/500-R 500 0.039米2
CFL-2-25/1000-R 1000 0.078米2
CFL-2-30/500-R 500 30 M20 × 2P; M20 × 2.5P; M28 × 2P 0.046米2
CFL-2-30/1000-R 1000 0.093米2
CFL-2-30/1500-R 1500 0.140米2
筒式濾芯3
Cylinder filter element three drawing including its length, diameter, installing forming

氣缸濾芯3

型號 L (mm) D (mm) 過濾面積 R (μm) 過濾介質
CFL-3-50/ 250-右 250 50 0.038米2 2、5、10、15、20、30、40、75 不銹鋼燒結纖維氈,不銹鋼絲布
CFL-3-50/ 500-右 500 0.078米2
CFL-3-50/ 1000-右 1000 0.150米2
CFL-3-60/500-R 500 60 0.094米2
CFL-3-70/500-R 500 70 0.108米2
CFL-3-75/500-R 500 75 0.115米2
CFL-3-90/500-R 500 90 0.140米2
CFL-3-150/500-R 500 150 0.230米2
筒式濾芯4
Cylinder filter element four drawing including its length, diameter, installing forming

氣缸濾芯4

型號 L (mm) D (mm) M 過濾面積 R (μm) 過濾介質
CFL-4-16/390-R 390 16 M16 × 1.5P; M33 × 2p; M55 × 2p 0.02米2 2, 3, 5, 7, 10, 15, 20, 25, 30, 40, 60, 75 不銹鋼燒結纖維氈,不銹鋼絲布,不銹鋼燒結絲網
CFL-4-50/500-R 500 50 0.07米2
CFL-4-63/750-R 750 63 0.15米2
CFL-4-65/266-R 266 65 0.05米2
CFL-4-70/500-R 500 70 0.10米2
CFL-4-70/1000-R 1000 70 0.21米2
特殊規格的產品可根據客戶要求生產。
功能
應用程序

褶皺濾芯可廣泛用於工業,醫療,化學過濾,如:

Two different length stainless steel cylinder filter element tubes

筒式濾芯管

One stainless steel cylinder filter element tube end welded detail

圓筒濾芯管端焊接詳圖

Two customized stainless steel cylinder filter element

定製氣缸濾芯

10 stainless steel cylinder filter element packed in wooden carton

圓筒濾芯木箱包裝,防止濾芯損壞