Home > Products > Sintered Titanium Powder Aerator

Sintered Titanium Powder Aerator With High Osmotic Efficiency

Sintered titanium powder aerator with mushroom shaped head.
Product Introduction

The sintered titanium powder filter elements are made of industrial high-purity titanium powder. As a honest manufacturer, we use 99.6899% titanium powder as raw material. After sieving, cooling and isostatic pressing of the raw materials, the microfiltration elements are sintered by high temperature and high vacuum. Finished products are featured with uniform structure, small filtration resistance, high separation and purification efficiency. It is especially suitable for urban sewage, new expansion of large-scale water plants & renovation of old aeration tanks, ozone aeration in the water treatment industry and catalytic gas aeration in the chemical industry.

Feature

  • Uniform aperture distribution, high porosity.
  • Small aeration bubble diameter & large gas-liquid boundary area.
  • High temperature resistance, can be used normally below 280 °C.
  • Low filtration resistance, high separation and purification efficiency.
  • No hole blockage, good chemical stability, resistant to acid & alkali.
  • Good oxidation resistance, 40% lower energy consumption than conventional aerator.
  • No magnetic, non-toxic, no shedding, no pollution, good biological compatibility.
  • Strong anti-microbial ability, does not interact with microorganisms.
  • Good airtightness and compact structure, suitable for harsh working conditions.

Styles

Sintered titanium powder aerator with cylindrical shape.

Aerator cylinder

There are three sintered titanium powder aerator plate.

Aerator plate

There are two mushroom head sintered titanium powder aerators.

Mushroom head aerator

A detailed picture about the mushroom head sintered titanium powder aerator.

Precision threads and burnished finish

Specification

  • Materials: pure titanium powder (99.6899%).
  • Bore Diameter: 0.22–100 μm.
  • Porosity: 35% –50%.
  • Working Temperature: ≤ 280 °C.
  • Compressive Strength: 0.5-1.5 Mpa.
  • Aerator Plate
    • Diameter: 100 mm, 150 mm, 180 mm.
    • Thickness: 2–5 mm.
    • Filter rating: 0.22 μm, 0.45 μm, 1 μm, 3 μm, 5 μm, 10 μm, 20 μm, 30 μm, 50 μm, 80 μm, 100 μm.
  • Aerator Cylinder
    • Diameter: 22 mm, 30 mm, 50 mm, 60 mm, 80 mm, 100 mm, 120 mm.
    • Length: 125 mm, 250 mm, 300 mm, 500 mm, 600 mm, 750 mm, 1000 mm.
    • Thickness: ≥1 mm.
    • Filter rating: 0.22 μm, 0.45 μm, 1 μm, 3 μm, 5 μm, 10 μm, 20 μm, 30 μm, 50 μm, 80 μm, 100 μm, 120 μm.
  • Mushroom Head Aerator
    • Diameter: 100 mm, 150 mm, 180 mm.
    • Thickness: 3 mm.
    • Height: 50 mm, 35 mm, 28 mm.
    • Active area: 332.84 cm2, 215.09 cm2, 103.12 cm2.
    • Inlet pipe size: 4', 6'.
    • Connection to main pipe: pipe thread.
    • Sealing: omniseal, viton.
  • Package
    1. Plastic bag + box + carton.
    2. Box/plastic bag + carton.
    3. Be Customized.

Application

Sintered titanium powder filter elements are widely used in urban sewage, chemical industry, petrochemical, bioengineering, pharmaceutical industry, food industry. Especially suitable for ozone aeration and other aeration works in high temperature and strong alkali conditions.

Sintered titanium powder aerators for circulating and adding oxygen to the lake.

Sintered titanium powder aerator for lake water aeration

Mounted sintered titanium powder aerator.

Sintered titanium powder aerator as pneumatic aeration component

Your inquiry will be highly appreciated!
Boegger will service for you !
E-mail: info@filter-elements.org

Please provide the detail requirements when inquiry to us. It will helps to give a satisfactory answer.

Full Name *
Country Code * + Phone Number *
Message *